BCZQQ - WHITE 37875;744-720;ENAMEL ALKYD

Product Identification

Product ID:WHITE 37875;744-720;ENAMEL ALKYD
MSDS Date:01/01/1985
FSC:8010
NIIN:00-117-8714
MSDS Number: BCZQQ

Responsible Party
AMERON INDUSTRIAL COATINGS DIVISION
201 N BERRY ST
BREA, CA 92621-3904
US

Emergency Phone: 714-529-4597

Info Phone: 714-529-4597

Cage: 09869

Contractor
AMERON INDUSTRIAL COATINGS DIVISION
BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: 09869

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

OSHA PEL 100 PPM


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL BENZENE (SARA III)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <5.0%

OSHA PEL 100 PPM/125 STEL

ACGIH TLV: 100 PPM/125STEL 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:INH:ANESTHETIC, IRRIT OF RESP TRACT OR ACUTE
CNS DEPRSSN W/HDACHE, DIZ, UNCON,COMA. SKIN & EYES: IRR

First Aid

First Aid:IN CASE OF CONTACT, FLUSH SIN & EYES W/PLENTY OF WATER WHILE
REMOVING CONAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH AIR.
CALL A PHYSCIAN IF SYMPTOMS PERSIST.

Fire Fighting

Flash Point:50F TCC
Lower Limits:0.9
Extinguishing Media:SM FIRES:CO*2, DRY CHEM. LG FIRES:POLYMER FOAM
PREFERRED
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAME, HOT
SURFACES, & ELECTRICAL, STATIC, OR FRICTIONAL SPARKS). AVOID
BREATHING VAORS. ENTILATE AREA.REMOVE W/INERT ABSORBENT &
NON-SPARING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
IN BLDG DESIGNED TO STORE NFPACLASS ONE FLAM LIQ. DO NOT TAKE
INTERNALLY. ADD LABEL WARNING.J
Other Precautions:GROUND CONTANERS WHEN POURING. AVOID FREE FALL OF LIQ
IN EXCESS OF FEW IN. DO NOT FLAME CUT, BRAZE OR WELD COATED
MATERIAL W/O APROVED RESPIRATOR OR APPROPRIATE VETILATION DOT:FLAM
LIQ.

Exposure Controls

Respiratory Protection:RESTRICT VENT:CHEM-MECH FLTR. CLSD:AIR-LINE TYPE
Ventilation:GEN DILTN/LOCAL EXHST TO KEEP TLV/LEL BELOW LIMIT, REMV
FUME
Protective Gloves:YES
Eye Protection:YES, FOR SPLASH
Other Protective Equipment:AVOID LONG EXPOSURE TO CONTAM CLOTHING
Supplemental Safety and Health
THIS PRODUCT IS A LUSTERLESS ENAMEL.VAPOR DENSITY:HEAVIER THAN AIR. WT
PER GALLON:10.58 LBS PRODUCT IS QUICK DRYING.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:223-290F
Vapor Pres:18
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:63.0

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT & HOT SURFACES

Disposal

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINERS. DISPOSE IN
ACCORDANCE W/FED., STATE & LOCA REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.